REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
8. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.
Operation: Repair
Selected model: SM-J710FQ
Software version: 31.5
If you are looking for 'Repair Network' function then you should use 'Patch Certificate'
Waiting ADB device... OK
Reading phone info...
Model: SM-J710FQ
Android version: 6.0.1
PDA version: J710FQXXU1AQC1
CSC version: J710FQTUR1AQC1
Phone version:
Product code:
CSC country code: TURKEY
CSC sales code: TUR
Phone SN: RF8HC16RLNH
IMEI:
HW version:
RF cal date:
Chip name: EXYNOS7870
Modem board:
Security patch: 2017-04-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Can not detected modem type
Done with Samsung Tool PRO v.31.5
Cihaza imei rpr yapmak istediğimde şöyle bir hata alıyorum. Yardımcı olursanız sevinirim
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
8. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.
Operation: Repair
Selected model: SM-J710FQ
Software version: 31.5
If you are looking for 'Repair Network' function then you should use 'Patch Certificate'
Waiting ADB device... OK
Reading phone info...
Model: SM-J710FQ
Android version: 6.0.1
PDA version: J710FQXXU1AQC1
CSC version: J710FQTUR1AQC1
Phone version:
Product code:
CSC country code: TURKEY
CSC sales code: TUR
Phone SN: RF8HC16RLNH
IMEI:
HW version:
RF cal date:
Chip name: EXYNOS7870
Modem board:
Security patch: 2017-04-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Can not detected modem type
Done with Samsung Tool PRO v.31.5
Cihaza imei rpr yapmak istediğimde şöyle bir hata alıyorum. Yardımcı olursanız sevinirim
Moderatör tarafında düzenlendi:
