Çözüldü Xiaomi Redmi Note 7 Anında Bootloader Unlock %100000000000

 Yazdır

blacksea

Yeni üye
Kayıtlı üye
20 Şub 2017
11
1
3
37
Operation : Xiaomi Boot Patch
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM48)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Sending Loader [redmi note 7 eng loader halab_tech_team firehose.elf.elf]...Write Error!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 4.7

bataryayı söküp takınca tekrar deneyince bu şekilde oluyor. doğru driver tam emin olmak içinhangisini indirmeliyim
 

gen_com

Çalışkan üye
Kayıtlı üye
20 Ocak 2018
644
255
63
37
127.0.0.1
Operation : Xiaomi Boot Patch
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM48)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Sending Loader [redmi note 7 eng loader halab_tech_team firehose.elf.elf]...Write Error!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 4.7

bataryayı söküp takınca tekrar deneyince bu şekilde oluyor. doğru driver tam emin olmak içinhangisini indirmeliyim
loaderi kabul etmiyor benim verdiğim avrupa miui12 sürümüne ait
 

blacksea

Yeni üye
Kayıtlı üye
20 Şub 2017
11
1
3
37
mi11 sürümüiçin indirdim bu şekilde hata verdi bu sefer

Operation : Xiaomi Boot Patch
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM48)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Sending Loader [prog_emmc_firehose_Sdm660_ddr.elf]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Reading Auth Blob...Not Found!
DebugData : BAAAABAAAAANAAAAAQAAAA==
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 4.9.1
 

gen_com

Çalışkan üye
Kayıtlı üye
20 Ocak 2018
644
255
63
37
127.0.0.1
mi11 sürümüiçin indirdim bu şekilde hata verdi bu sefer

Operation : Xiaomi Boot Patch
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM48)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Sending Loader [prog_emmc_firehose_Sdm660_ddr.elf]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Reading Auth Blob...Not Found!
DebugData : BAAAABAAAAANAAAAAQAAAA==
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 4.9.1


QcFire Ver. 6.3 versiyonu yükle
 

receperdem58

Yeni üye
Kayıtlı üye
3 Eyl 2020
5
2
3
23
kardeşim senin sayende hallettim valla allah razı olsun umt den edl modda verdiğin firehouse dosyasını patchledim ardından unlock dedim flash all dosyasını editlemeden direk lavender room yazmayı denedim unlock olduğu şçşnde direk yazdı zaten edite falan gerek kalmadı anlayacağın sağolasın